ro membrane for desalination

5000TDS 4-inch Low Pressure Reverse Osmosis RO Membrane Element for Water Treatment Various reverse osmosis equipment membrane modules have an allowable pH value range, and the pH value of the influent has little effect on the water production; but even within the allowable range, the pH value has a greater impact on the desalination rate. On the one hand, the pH value has a great impact on the product The conductivity of water also has a certain influence. This is because

Sea Water Industrial RO Membrane 8040 for RO Water Purifier System Seawater desalination membrane elements have the characteristics of low pressure, small equipment investment, stable desalination performance. It is suitable for the treatment of seawater and high-concentration brackish water. It can be used for various industrial water treatment such as seawater desalination, high-concentration brackish water desalination, power plant boiler make-up water, etc. It can also be

4-inch FR Low Pressure Water Purifier of Reverse Osmosis RO Membrane Element The anti-pollution reverse osmosis membrane is an aromatic polyamide composite membrane element made for the desalination of brackish water. It has the characteristics of low pressure operation, high water production and good desalination performance. At the same time, the membrane surface is treated by a special process. , changing the charge and smoothness of the membrane surface, increasing the

5000TDS Low Pressure Water Purifier of Reverse Osmosis RO Membrane Element The three main indicators of the performance of reverse osmosis membrane elements are the production water flux, the salt rejection rate and the membrane pressure drop, which are mainly characterized by the specific feed water pressure. Brackish water generally refers to natural water, surface water, and artesian well water with a salt content of 1000-15000 mg/L. Due to the high salt content, it cannot

800GPD High Flow 50% Recovery Rate Ro Membrane for Household Water Filter RO system membrane is made of the sedi-permeable membrane with the 0.1mm filtration precision for separating and removing the dissolved solids, organics, bacteria etc. According to the water output capacity, the different large flow membrane is available as follows: 300G, 400G,500G,600G,700G,800G. Typical RO reject / RO concentrate TDS concentrations are often in the range of 30,000 50,000 mg/liter.

Residential Membrane Elements / Household Reverse Osmosis RO Membrane 400 Gpd Domestic RO membrane elements are spiral wound, composite polyamide membrane elements for Tap Water and Well Water treatment in low salinity application. These membranes are characterized by a very low operating feed pressure, normally is from 65psi(0.45MPa) and result in higher salt rejection rate, above 96%. These membranes are designed for domestic/commercial water treatment applications, such as

Industrial RO Water Purifier 8040-ULP Reverse Osmosis Membrane for RO Plant Reverse osmosis membranes can be used for a variety of fluid separations. Currently, the most widely used reverse osmosis membranes are cross-linked aromatic polyamide reverse osmosis membranes. Usually, m-phenylenediamine and trimesoyl chloride are used for interfacial polycondensation on the surface of porous polysulfone supported membranes. A polyamide layer is formed. The polyamide layer obtained

4040 Nanofiltration Membrane Water Treatment Membrane for Water Filtration System Model Number Description 4040-NF Performance & Test Condition The Desalination Rate % 98% Water Rate GDP 1800 The Test pressure 100psi Test solution Temperature 25 1C Test Solution Concentration NaCl 2.0-11.0 Recovery Of Single-Branch Membrane Element 15% Feed water SDI 5 TYPE Production Flow Rate GPD(m/d) Stable Rejection Rate Operation Pressure Recovery Rate 4040-LP 2400(9.1) 99.5% 225 psi

Industrial 8040-LP Reverse Osmosis Membrane for Water Treatment Purifier System Reverse osmosis membrane is the core element of realizing reverse osmosis water filter, and it is an artificial semi-permeable membrane with certain characteristics made by simulating biological semi-permeable membrane.LP brackish water series membrane elements have the characteristics of low-pressure operation, high water production and good desalination performance. It is suitable for high