Water Filter Domestic Reverse Osmosis Membrane Model 1812-80 Gpd 50 Gpd
Purple Horn Domestic 1812 50g Reverse Osmosis Water Purifier Parts RO Membrane
The characteristics of reverse osmosis membrane technology: the equipment has the advantages of compact configuration, small footprint, low water production per unit volume and low energy consumption, and has been used in almost all industries. In the case of no disguise, it relies on the pressure greater than the osmotic pressure to flow out the desalinated water through the capillary action of the membrane, and it also has the screening function of the membrane, which can remove very small bacteria and viruses. Therefore, it has developed rapidly since its development. It is not only used for desalination of seawater and bitter alkaline water, but also as pre-desalination of boiler feed water and preparation of ultrapure water. Pre-desalination before ion exchange can not only remove salt but also remove salt. Bacteria, particles, etc.
Advantages of our household reverse osmosis membrane:
1. It should have high-efficiency desalination rate at high flow rate.
2. It has high mechanical strength and service life.
3. Can function under lower operating pressure.
4. Good chemical stability and high cost performance.
Performance and test conditions
| Model | Average Permeate Flow (gpd) | Stable Desalination Rate (%) | Minimum Desalination Rate (%) |
| BW1812-50 | 50 | 97 | 96 |
Note: Single membrane permeate flow change in the range of ±15%
Test Conditions
Test Pressure 70psi (0.48Mpa)
Temperature 25 ºC
Concentration of Testing Solution (NaCl) 250ppm
Testing Solution PH value 6.5-8.5
Recovery Rate of Single Membrane Element 50%

- When PH is above 10, the Maximum Temperature of Continuous Operation is 35ºC.
- Under certain conditions, the presence of free chlorine and other oxidants in the water may cause serious membrane damage, which doesn't belong to product warranty range.
This standard specifies product specifications for reverse osmosis membrane elements for household and similar purposes (here in after referred to as reverse osmosis elements) .This standard applicable to reverse osmosis membrane elements that use municipal tap water or centralized water supply as raw water for use in homes and similar places.


FAQ:
A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balanced against the copy of B/L.
Q: What is the delivery time?
A: Usually within 15days. Also depends on order quantities.
Q: Can the package be customized by our own logo ?
A: Yes, the package can be customized your logo, but the MOQ will be higher for which we can discuss as per the specific orders.
Q: How to install after the products arriving destination?
A: We will provide detailed illustrations to you. And we can also provide guide to your workers how to use it and how to maintain
it.
Q:What's the certification do you have?
A: We have NSF, ISO9001, OHSAS18001, ISO14001 Certifications.
Domestic Reverse Osmosis Membrane Model 1812-80
,domestic reverse osmosis water filters 1812-80
,ro membranes 80 gpd 1812-80
-
1000 Lph Ss Ro Plant Membrane With Chiller Commercial
1000 lph RO water Treatment Machine Plant / Water Purification RO Plant Reverse osmosis plants require a variety of pre-treatment techniques including softening, dechlorination, and anti-scalent treatment. Following pre-treatment, high levels of pressure send water through a semi-permeable membrane, ... -
Industrial RO Membrane for Sea Water System High Rejection Membrane
Industrial RO Membrane for Sea Water System High Rejection Membrane Product Description What is reverse osmosis? The reverse osmosis device is an equipment to purify the saltine water with the action of pressure difference of semi permeable membrane. It is called reverse osmosis, as it is counter to ... -
4040 NF RO Membrane Nanofiltration In Wastewater Treatment 1800GDP
4040 Nanofiltration Membrane Water Treatment Membrane for Water Filtration System Model Number Description 4040-NF Performance & Test Condition The Desalination Rate % 98% Water Rate GDP 1800 The Test pressure 100psi Test solution Temperature 25± 1ºC Test Solution Concentration NaCl 2.0-11.0 ...