Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
Large Flow High Recovery RO Membrane Element System 700 GPD
700GPD Large Flow with High Recovery Rate RO Membrane Element for RO System
Reverse osmosis membranes can be used for a variety of fluid separations. Currently, the most widely used reverse osmosis membranes are cross-linked aromatic polyamide reverse osmosis membranes. Usually, m-phenylenediamine and trimesoyl chloride are used for interfacial polycondensation on the surface of porous polysulfone supported membranes. A polyamide layer is formed. The polyamide layer obtained by the reaction is the key to influence the water permeability and salt retardation rate. Therefore, focusing on the interfacial polycondensation reaction and optimizing the polyamide layer in order to obtain a reverse osmosis membrane with large flux and high salt removal rate has always been the direction of many researchers.
Performance and test conditions
| Model | Average Permeate Flow GPD(m³/) | Stable Desalination Rate % |
| BW-3012-700 | 700(2.65) | 95 |
Note: Single membrane permeate flow change in the range of ±15%
Test Conditions
Test Pressure 100psi( 0.7Mpa)
Temperature 25ºC
Concentration of Testing Solution (NaCl) 500ppm
Testing Solution PH 2-11
Note:1. The Max. continous operation temperature is 35ºC when PH rate over 10.
2. In certain conditions,if would cause membrane breakage if the free chlorine or the other oxidant in feedwater.The production quality guarantee range is notincluded membrane breakage by oxiadation.
Dimension of Membrane Element
3012-700: A:12.0mm B:3.0mm C:0.68mm D:0.75mm E:10mm
HN-JCM brand membrane element produced by world advanced membrane technology and fully automatic production equipment. It can operation under the extra low pressure. Our membrane suitable for household water purifiers, hospitals, laboratory pure water, treatment municipal tap water, well water and other low salinity water sources.
FAQ:
Q: How to pay?
A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balanced against the copy of B/L.
Q: What is the delivery time?
A: Usually within 15days. Also depends on order quantities.
Q: Can the package be customized by our own logo ?
A: Yes, the package can be customized your logo, but the MOQ will be higher for which we can discuss as per the specific orders.
Q: How to install after the products arriving destination?
A: We will provide detailed illustrations to you. And we can also provide guide to your workers how to use it and how to maintain
it.
Q:What's the certification do you have?
A: We have NSF, ISO9001, OHSAS18001, ISO14001 Certifications.
Large Flow High Recovery RO Membrane 700 GPD
,High Recovery RO Membrane Element 700 GPD
,high recovery ro system 700 GPD
-
Reverse Osmosis Pressure Vessel Ro Frp Membrane Housing 4040 SS 304 Water Filter Spare Parts
4040 SS 304 Membrane Vessel for RO Water Treatment Our SS304 vessel have reliable quality and also have good price, because we have larger producing and sales capability and make cost lower. Also our producing line is also professiona. We also have perfect quality control system, products before ... -
400gpd 500 Gpd 3013 4040 Ro Membrane Housing Parts For Reverse Osmosis Water Purifer
400-600gpd 3013 4040 ro membrane housing for Reverse Osmosis Water Purifer Housing quick connection Material:Food degree. Suitable for 3013-400GPD, 3013-500GPD,3013-600GPD Max operation pressure:28KGS packing condition: carton packing. Basic Info. Model NO. hn-B Pipe Design Rate Incremental ... -
Nano Filtration NF RO Membrane 40 Inch Sewage Municipal Direct Drinking Water
Nanofiltration Membrane 4040 Industrial Sewage Municipal Direct Drinking Water Model Number Description 4040-NF Performance & Test Condition The Desalination Rate % 98% Water Rate GDP 1800 The Test pressure 100psi Test solution Temperature 25± 1ºC Test Solution Concentration NaCl 2.0-11.0 Recovery ...
